3
+380 44 507 02 07
Introduction
Safety Requirements for Installation and Maintenance of
Tracking Device "BI-820OBD TREK"
Compliance with the safety precautions is the responsibility of
technical personnel installing the tracking device, as well as employees in
charge of equipment on site.
To avoid damage to the device, please, keep it in a stress-resistant
case. Before using the device, please, place it so that its status LED
indicators are clearly visible. Prior to dismantling outputs of the device,
please, disconnect its power supply unit.
Transportation and Storage
The tracking device in the manufacturer's package can be
transported by any closed land and sea transport mode (in railroad cars,
containers, closed trucks, cabins, etc.). It can also be transported in
heated aircraft cabins.
When transporting and storing the device, the package instructions
on the labels must be observed.
Warranty
The warranty period for the tracking device shall be 12 months of
the date of commissioning. The commissioning date must be recorded
per requirements set forth in the certificate for the tracking device; if no
such data are available in the certificate, the warranty period shall be
counted starting with the tracking device shipment to the customer.
Manufacturer's warranty shall only be valid provided that the
customer complies with the requirements of this Manual. In the event of
their violation, or in the presence of mechanical or electrical damage
caused by the factors that are not covered in this Manual, the Warranty
shall be deemed void.
Device
Intended Use of the Device
Tracking device BI-820OBD TREK is used to solve problems of
navigation and control over the transport standard. The device is
intended for use on moving objects equipped with OBD-II diagnostic
connector and is used to solve problems:
• Determination of geographic coordinates, speeds and directions of
movement;
• Data collection from the on-board computer of cars through the
OBD-II interface;
