S7 Server
Manual
Last updated: 2/1/2016
Page 11 of
12
Page 11 /
12
7.3
Software Version Checking
You can check which version of the software you are currently running on
the ‘System->Overview’ page. ‘File System version’ displays the date of the firmware your
server
use. In the example below, the
S7 Server
is using 20150915 firmware.
7.4
Restore Initial Setting
There is a ‘Reset’ button on the right hand side of the Ethernet port, next to the green and
red LED light. Power on
server
and let it run for 5 minutes, then press and hold the reset button
for 10 seconds in order to restore to the default settings and reboot. The red LED will flash once
every 15 seconds automatically if the reset is operated successfully.
