Magicians SOCD Cleaner V2
Section 6: Electrical
INSTALLATION MANUAL & USER GUIDE
REV B
PAGE 11
Micro USB Port
Where to connect a USB cable when performing a firmware update. Alternatively, you can use
this to power up the board. But in most installations, it will be left unplugged.
Connection Type:
Micro USB
Connector Map Number:
5
OMNI Port & LED Port
This is where devices like the ODIN or LOKI are plugged into. Be sure to use the black stem
board included with their kit. The LED port is an output that will power the LEDs on the ODIN
or LOKI. There is no series resistor for the LED port.
Connection Types:
JST XH, male headers
Connector Map Numbers:
6 & 7