BT-700 Operator Manual 6
P/N : 700-ENG-OPM-EUR-R02
Bistos Co.,Ltd.
2018,03
1.3
Cautions
WARNING
: Do not connect to an electrical outlet controlled by a wall
switch.
WARNING
: SHOCK HAZARD — Do not attempt to connect or
disconnect a power cord with wet hands. Make certain that your hands are
clean and dry before touching a power cord.
WARNING
: Use only patient cables and transducers supplied with the
monitor. Use of any other patient cables may result in out-of-specification
performance and possible safety hazards.
CAUTION
: Keep the operating environment free of dust, vibrations,
corrosive, or flammable materials, and extremes of temperature and
humidity. The unit should be kept clean and free of transducer gel and
other substances.
CAUTION
: The relevant law restricts this device to sale by or on the order
of a physician.
CAUTION
: When installing the unit into a cabinet, allow for adequate
ventilation, accessibility for servicing, and room for adequate visualization
and operation.
CAUTION
: Do not operate the unit if it is damp or wet because of
condensation or spills. Avoid using the equipment immediately after
moving it from a cold environment to a warm, humid location.
CAUTION
: Never use sharp or pointed objects to operate the front-panel
switches.
WARNING
: Do not contact RS-232C port and patient at the same time.
WARNING
: AC/DC Adaptor should use appointed product.
WARNING
: SHOCK HAZARD — BT-700 doesn't have protection
against the burn injury caused by RF Surgical equipment. Do NOT use
this product along with RF Surgical equipment.
WARNING
: The power receptacle must be a two wire non-grounded
outlet.
