6
Steam Mop Product Features
Tip:
Do not attempt to
use your Steam
Mop without water
in the tank.
Water Tank.
The Water Tank is located on the back of the
Steam Mop. It can be refilled with water any time during
use. Distilled or demineralized water may be used in place
of tap water.
Do not use chemicals with your Steam Mop.
Water Filter.
The Filter removes minerals and other
impurities from tap water, preventing water deposits from
damaging your Steam Mop. It should be replaced when the
bright green grains turn blue. To maximize performance of
the Filter, distilled or demineralized water may be used.
Ready Light.
The Ready Light will glow when tap water
has been converted to steam and the Steam Mop is ready
to use.
Trigger.
Press to release steam.
Swivel Head.
Allows you to clean in tight spaces and
under cabinets.
Mop Pad.
The absorbent terry cloth Mop Pad picks up the
dirt loosened by the steam. The Mop Pad is reusable and
machine washable.
Storage Hook.
Mount on a wall for convenient storage in a
closet or utility room.
Mounting instructions:
A.
Choose a mounting location that is over a stud.
B.
Hold the Storage Hook against the wall with the
screw holes at the top of the hook. With a pencil,
mark the position of both screw holes.
C.
Drill 1/8” diameter holes in the center of your pencil
marks.
D.
Place Storage Hook over drilled holes.
E.
Secure Storage Hook by screwing in place with the
provided screws.
Clean Out Pin.
The Clean Out Pin is used to clear
blockages in the Steam Nozzle. To clean the Nozzle, insert
the Clean Out Pin into the brass spray tip.
1.
2.
3.
4.
5.
6.
7.
8.
