BISSELL.com
7
Maintaining the Mop Pads and Debris Trap
Formula
Water
1.
Turn the Power Switch OFF.
Press the button on top of the
Mop Tank and pull to remove.
Place tank upside down on a
soft surface.
2.
Firmly pull up on the Mop
Pads to remove from Mop Pad
Drivers. Replace Mop Pads if
damaged.
3.
Machine wash separately
in warm water. Use only liquid
detergents. Do not use bleach
or fabric softener. Tumble dry
on low. Do not iron or dry clean.
4.
To reattach, use the middle
hole on the pads to align with
the driver.
5.
While in mopping mode,
your SpinWave® Robot can
sweep up a limited amount of
dry debris, so be sure to empty
the trap after each clean.
6.
Pull down to open dry
debris trap door and empty
debris.
Mop Mode
(continued)
Dry Vacuum Mode
For more help, visit
support.BISSELL.com
.
Manual Cleaning
In Dry Vacuum Mode, your BISSELL SpinWave Robot will clean using a combination of dual edge
cleaning brushes, a rotating brush roll and powerful suction to clean multiple floor types in your home.
x2
1.
Turn the robot ON. Press
the Start/Pause Button to start
cleaning.
2.
When finished, press the
Start/Pause Button again to
stop the robot.
3.
Return the robot to the dock.
Press the Start/Pause Button
twice. The light ring will flash
white as it finds its way back.