background image

2

   BISSELL.com

SAVE THESE INSTRUCTIONS 

THIS MODEL IS FOR HOUSEHOLD USE ONLY. 

IMPORTANT INFORMATION 

• Do not turn your appliance ON until you are familiar with all instructions and operating procedures.

• This product contains a wireless device. Refer to FCC/IC Notice Document for regulatory information.

The software included in this product contains open source software. The open source licenses associated with this product may be obtained by visiting 

www.BISSELL.com/opensource. With regards to GNU Lesser General Public License Version 2.1, you may obtain the complete corresponding source code 

for a period of three years after the last shipment of this product by visiting BISSELL.com/opensource/2291 which leads to the download page for such 

source code. This offer is valid to anyone in receipt of this information.

IMPORTANT SAFETY INSTRUCTIONS

WARNING 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY 

When using an electrical appliance, basic precautions should be 

observed, including the following:

• Failure to follow the warnings and instructions may result in electric shock, 

fire and/or serious injury.

• Unplug from outlet before conducting maintenance.

• Place the cords from other appliances out of the area to be cleaned.

• Do not operate the vacuum in a room where an infant or child is sleeping.

• Do not operate the vacuum in an area where there are lit candles or fragile 

objects on the floor to be cleaned.

• Do not operate the vacuum in a room that has lit candles on furniture that 

the vacuum may accidentally hit or bump into.

• Do not allow children to sit on the vacuum.

• Use indoors only.

• Do not immerse. Use only on hard floor surfaces moistened by the cleaning 

process during Mop Mode.

• Do not allow to be used as a toy. Close attention is necessary when used by 

or near children.

• Do not use for any purpose other than described in this user guide. Use only 

manufacturer’s recommended attachments.

• Do not use with damaged cord, Docking Station or Charger. If appliance is 

not working as it should, has been dropped, damaged, left outdoors, or 

dropped into water, have it repaired at an authorized service center.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or 

pull cord around sharp edges or corners. Do not run appliance over cord. 

Keep cord, Docking Station or Charger away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the Charger, not the cord.

• Do not handle Docking Station, Charger, contact points or appliance with 

wet hands.

• Do not put any object into openings. Do not use with any opening blocked; 

keep free of dust, lint, hair, and anything that may reduce air flow.

• Turn OFF all controls before unplugging.

• Do not use to pick up flammable or combustible liquids (lighter fluid, 

gasoline, kerosene, etc.) or use in areas where they may be present while 

vacuuming.

• Do not pick up anything that is burning or smoking, such as cigarettes, 

matches or hot ashes while vacuuming.

• Do not use without dry tank, wet tank or filters in place.

• Use only BISSELL cleaning products intended for use with this appliance to 

prevent internal component damage. See the “Mop Mode: Choosing Your 

Formula” section of this manual.

• For use only with BYD battery pack model INR18650 M26-4S1P or BISSELL 

model 1625424.

• For use only with SZ YingYuan charger model SAW12-190-0600UD.

• For use only with BISSELL Docking Station model 1624770.

• Keep hair, loose clothing, fingers, and all parts of body away from openings 

and moving parts.

• Do not carry the appliance when in use.

• Do not use the appliance during charging.

• When battery pack is not in use, keep it away from other metal objects, 

like paper clips, coins, keys, nails, screws, or other small metal objects, that 

can make a connection from one terminal to another. Shorting the battery 

terminals together may cause burns or a fire.

• Prevent unintentional starting. Ensure the ON/OFF switch is in the OFF 

position before connecting to battery pack, picking up or carrying the 

appliance. Do not carry the appliance with your finger on the switch.

• Recharge only with the charger specified by the manufacturer. A charger 

that is suitable for one type of battery pack may create a risk of fire when 

used with another battery pack.

• Do not use any battery pack which is not designed for use with the 

appliance. Use of any other battery packs may create a risk of injury and fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid 

contact. If contact accidentally occurs, flush with water. If liquid contacts 

eyes, additionally seek medical help. Liquid ejected from the battery may 

cause irritation or burns.

• Do not use a battery pack or appliance that is damaged or modified. 

Damaged or modified batteries may exhibit unpredictable behavior 

resulting in fire, explosion or risk of injury.

• Do not expose a battery pack or appliance to fire or excessive temperature. 

Exposure to fire or temperature above 130°C/265°F may cause explosion.

• Follow all charging instructions and do not charge the battery pack or 

appliance outside of the temperature range 4-40°C/40-104°F. Charging 

improperly or at temperatures outside of the specified range may damage 

the battery and increase the risk of fire.

• Have servicing performed by a qualified repair person using only identical 

replacement parts. This will ensure that the safety of the product is 

maintained.

• Do not modify or attempt to repair the appliance or the battery pack.

• Do not use appliance in an enclosed space filled with vapors given off by 

oil-based paint, paint thinner, some moth-proofing substances, flammable 

dust, or other explosive or toxic vapors.

• Do not use to pick up toxic material (chlorine bleach, ammonia, drain 

cleaner, etc.) while vacuuming.

• Do not incinerate the appliance even if it’s severely damaged. The batteries 

can explode in a fire.

• Do not charge the machine outdoors.

• Do not position Docking Station near stairs or cliff edges.

• Keep appliance on a level surface.

• Clear the area to be cleaned. Remove excess clutter like power cords and 

small objects from the floor that could entangle the appliance and tidy up 

the cleaning area. Lift items such as curtains, and tablecloths off the floor.

• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

• This product contains a wireless device. Refer to website for regulatory 

information.

• Brush or mop pads may start unexpectedly. Turn the Power Switch OFF 

before cleaning or servicing.

• Plastic bags can be dangerous. To avoid danger of suffocation, keep this bag 

away from babies and children.

READ ALL INSTRUCTIONS BEFORE USE.

Содержание SPINWAVE 2859 Series













Отзывы: