www.BISSELL.com
15
DRY MODE NOTE:
Use a “raking” motion to clean. Start with the tool farthest
away and rake in small increments as you bring the tool toward you. The rubber
nubs will help attract hair to the suction channel.
Attach the tool and select dry mode
to first pick up dry debris and pet
hair. The suction will be at the lower
part of the tool, near the dry cup.
Follow hose plug-in instructions from
steps 1 & 2 on page 14.
NEW!
2-in-1 Pet Upholstery Tool
*Make sure your clean tank has water & formula to use the tool in wet mode.
Turn off the machine.
Hold the cup and twist
counterclockwise line up
the arrow with the unlock
symbol and remove.
Take off the cup
to empty hair
and debris.
To reattach the cup, line
up the cup to the tool
indents, and rotate clock
wise. The arrow will line
up with the locked icon
when secured.
To Deep Clean, move the
switch to wet mode. Press
the trigger to spray your
water and formula; use
the top of the nozzle to
extract stains and odors.
To remove any hair or
trapped debris from the
nozzle, first turn off the
machine. Pull the nozzle
tab away from the tool to
remove and rinse under
running water.
Replace to the tool by
lining up the nozzle edge
and snap into place.
Before storing, make sure
all hair is removed from
the dry cup and nozzle
has been rinsed under
running water.
Dry Mode
(switch up)
Wet Mode
(switch
down)
Empty the cup when
it fills with hair and
debris.
Dry
Suction
Channel
Remove hair
that may wrap
around the filter.
Wet
Suction
Channel
WET MODE NOTE:
Start from the area farthest away. Hold the trigger down, and
pull the tool toward you. Keep the tool in contact with the surface as you pull. You
will see extraction through the nozzle.
1
2
3
4
5
6
7
8
9
