10
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
T
roubleshooting
Reduced Spray OR No Spray.
Possible cause
Remedies
5.
The pump belt may be broken.
5.
Turn power Switch OFF (O) and unplug
from the outlet. To check if a pump
belt has broken, you will need a flat head
screwdriver. Insert the blade end into the
lower slot of the belt access door to release
the lower snap. If necessary, insert the balde
end into the upper slot to release the upper
snap. Examine the belt for breakage. You
should be able to see the pump belt looped
around the motor shaft. If it is broken or
missing, please refer to Replacement Parts
on page 11 before calling BISSELL Consumer
Services. Complete installation instructions
will accompany the replacement belt.
DirtLifter PowerBrush Does Not Turn.
Possible cause
Remedies
1.
The brush belt or pump belt is off or broken.
1.
Turn the machine OFF (O) and unplug from
the outlet. To check if the brush belt or
pump belt has broken, you will need a flat
head screwdriver. Insert the blade end into
the lower slot of the belt access door to
release the lower snap. If necessary, insert
the blade end into the upper slot to release
the upper snap. Examine the belt for
breakage. If broken, please refer to Replacement
Parts on page 11 before calling Consumer
Services. Complete installation instructions
will accompany the replacement belt.
Cleaner Not Picking Up Solution
Possible cause
Remedies
1.
Nozzle window may not be properly attached.
1.
Make sure the tabs on the floor nozzle
window are inserted through the mating slot
in the main housing. Re-install if necessary.
2.
2-in-1 tank lid is not installed.
2.
Re-install lid; refer to the Operation section.
3.
2-in-1 tank is not properly seated.
3.
2-in-1 tank must be firmly seated to function;
remove and reseat 2-in-1 tank.
4
2-in-1 tank has picked up maximum dirty water.
4.
Empty 2-in-1 tank and refill, refer to the
Operation section.
Insert Screwdriver
Blade Here
Lift Here
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
ug120-4007_1694-8806_507.indd 10
ug120-4007_1694-8806_507.indd 10
6/4/07 2:47:48 PM
6/4/07 2:47:48 PM
