Handle positions
press the handle release pedal, located on the lower
left side of the vacuum, with your foot to place your
vacuum into one of three cleaning positions.
1. Upright –
For storage and above floor
cleaning with tools.
2. normal cleaning –
Press handle release
pedal once. Position used for most
household floor cleaning tasks.
3. low cleaning –
With the vacuum in normal
cleaning position, press handle release pedal
again. Use for reaching under low furniture
such as tables, chairs or beds.
Height adjustment
the powerfoot/rotating floor brush on your vacuum
can be adjusted to clean several floor surfaces.
notE: for optimal cleaning performance,
adjust to the lowest practical setting. If
your cleaner is difficult to push, adjust to
the next higher setting.
1.
Turn height adjustment knob to desired setting.
bare floor
For non-carpeted,
indoor surfaces
lowest Setting
For short pile carpets
Medium Setting
For short and medium
pile carpets
highest Setting
For plush pile carpet
Pet Hair Lifter
Use to pick up pet hair from carpeted surfaces. Just
vacuum like you normally would. the vacuum will
grab pet hair when you pull back and it will release
hair and suction it up when you push forward.
notE: turn vacuum off before you flip up or
flip down the pet hair lifter.
1.
carpeting –
While vacuum is in upright
position flip Pet Hair Lifter down until it
clicks into place on the front of the foot. Turn
height adjustment knob to lowest setting.
2.
hard floor –
Flip Pet Hair Lifter up. Push the
yellow release button just above the feature, and
it will flip up and out of the way.
O
perations
7
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Tip:
Before cleaning under low furniture, check
area first for objects that might harm the unit
or block the vacuum hose.
1.
2.
3.
1.
2.
1.
Height Adjustment Knob
