4
BISSELL.com
Using the Vacuum
For additional support videos and information, visit
support.BISSELL.com
.
1.
Press the red power button
with your foot to turn the
vacuum ON and OFF.
2.
Press the recline pedal and
pull handle back towards you.
3.
Turn the dial on the foot
to the desired setting. If the
dial is difficult to turn, tilt the
vacuum back slightly to take
the weight off the foot while
turning.
Tip:
For best performance,
adjust to the lowest practical
setting. If your vacuum is
difficult to push, adjust to the
next higher setting.
Above Floor Cleaning
Clean hard-to-reach spaces with the Quick Release Extension Wand.
1.
Push the release button to
remove extension wand.
2.
The hose can be removed
from the extension wand.
To do so, twist circular hose
cuff counter-clockwise and
remove from handle.
3.
Attach desired tool.
Note:
For optimal use, attach
the Pet TurboBrush® Tool
directly to the hose instead
of the wand.
WARNING
To reduce the risk of injury from moving parts while the vacuum is turned ON, always move the
vacuum via the rolling wheels by using the upper handle at the back of the vacuum. Do not carry the vacuum while it is running.
Always place vacuum on floor with handle in upright position when using tools.
NOTE:
Rotating floor brush continues to rotate while tools are in use. Never place fingers under the vacuum when it is running.
Never place Powerfoot on furniture or uneven surfaces.
NOTE:
Certain carpets and low humidity conditions may generate small static discharges. Static discharges are entirely harmless
and are not associated in any way with the main power supply.
