BISSELL.com
5
Emptying the Dirt Tank
We have additional tips for maintaining your machine at
support.BISSELL.com
.
1.
Press the tank release
button and pull out to remove
dirt tank.
2.
Hold the dirt tank over a
trash bin. Press the bottom
release button to empty.
3.
Twist cyclone clockwise
and pull down to remove from
tank.
4.
Clean cyclone with warm
water and mild detergent.
Let dry for 24 hours before
reinstalling.
5.
Twist cyclone counter-
clockwise to reinstall.
6.
Place tank back on vacuum
and press firmly until it clicks
into place.
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
Maintaining the Pet TurboBrush® Tool
For more helpful maintenance tips, check out
support.BISSELL.com
.
1.
Twist gray collar counter-
clockwise until slot appears,
then separate faceplate.
2.
Remove brush roll, belt
and paddle wheel. Inspect
for damages and replace if
necessary.
3.
To reassemble, align two
clips on each end of paddle
wheel with belt attached and
pop back into place. Place
brush roll with belt back
in. Faceplate will not close
properly if all parts are not
aligned correctly.
