9
www.BISSELL.com
Replacing the Brush & Belt
1
2
3
Unplug vacuum, turn
over and unscrew 6
Philips-head screws to
remove bottom cover.
Lift Brush Roll
straight out. Inspect
belt, replace if it
appears damaged.
If the belt is not broken, remove
Brush Roll from inside of looped
belt. Inspect Brush Roll by
placing it on its end and spinning
it. The Brush Roll should spin
freely, multiple times by one flick.
If it doesn’t, replace Brush Roll.
4
Replace the Brush Roll
and belt by looping the
belt over the motor shaft
and the Brush Roll. Line up
the end caps and pull the
brush forward into place.
This will stretch the belt.
5
Once the Brush Roll is installed,
place the bottom cover back on
and replace the screws.
Cleaning the Separator
1
2
Remove the
separator by twisting
to the left (counter-
clockwise), then pull
it out through the
bottom of the tank.
Rinse and dry all
sections of Dirt Tank
with paper towel.
Press the Tank
Release Button
and pull handle
to lift Dirt Tank
away from
vacuum.
End Cap
Belt
