www.BISSELL.com.au
10
Press the Dirt Tank Release Button
and pull away from vacuum.
Twist tank cover to the unlock position
then pull up on handle.
Remove Pre-Motor Filter from top
of Dirt Tank lid by pulling out.
Both Pre-Motor Felt and Foam Filters are
washable. Clean with mild detergent, rinse
and squeeze all excess water. Allow filters
to dry completely before reinserting. Return
Pre-Motor Filters to the top of the Dirt Tank,
placing the thick Foam Filter in last.
Clean/Replace Pre-Motor Filters
WARNING
To reduce the risk of electrical shock, turn power switch OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the
dirt container.
1
2
3
4
NOTE:
Replace filters every 3 to 6 months. Visit BISSELL.com.au for filter replacements.
24h
