Bissell HYDROCLEAN COMPACT 1991 Series, Руководство пользователя

Страница: 6 / 40

www.BISSELL.com
6
Insert vacuum separator into
collection tank top lid and
press firmly into place.
Open top cover by pulling
out and then up on top
cover lever. Continue to lift
up until top cover locks
into open position.
Assembly: Water Filter Vacuum Mode
1
Attach hose to body by
inserting hose end into hose
opening, turning clockwise
until it locks in place.
WARNING
Do not plug in your cleaner until you have completely assembled it per the following
instructions and are familiar with all instructions and operating procedures.
2
IMPORTANT
Your cleaner is a water filtration vacuum. NEVER use it with the vacuum separator installed
without adding clean tap water inside the collection tank. You MUST fill the collection tank
with clean tap water to the clean water fill line on the back of the collection tank for the
cleaner to function properly. Vacuuming without clean water in the collection tank may
cause damage to the motor and may void the guarantee.
3 4
Attach multi-surface floor
tool to end of telescoping
extension wand. Push
down on floor type
selector to clean carpet
and rugs. Push up on
floor type selector to
engage brushes and
blade to clean hard floors.
Attach telescoping
extension wand to hose
grip by inserting end of
wand onto end of grip.
5
If cleaning upholstery,
hard-to-reach areas or
above floor surfaces,
attach small vacuum
cleaning tools directly to
end of hose grip.
6
NOTE: Vacuum separator is white
and has a closed side tube.
Closed Side Tube