Bissell HYDROCLEAN COMPACT 1991 Series, Руководство пользователя

Страница: 16 / 40

www.BISSELL.com
16
Empty Collection Tank
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
Insert proper
separator back into
top lid and place
on tank. Place tank
back onto body
and close top cover.
Reconnect hose
and solution hose.
NOTE: If dry debris accumulated in back chamber of collection tank, slowly and
carefully empty dirty water out first. Then, empty dry debris into a trash container.
Lift collection tank
up and out of body.
4
7
8 9
Remove
top lid from
collection
tank and
set aside.
Empty dirty
water from
tank into a
sink, toilet or
outside and
rinse clean.
Disconnect hose
from cleaner.
Allow all parts to
dry then reassemble
back onto top lid.
10
Turn machine off
and disconnect
solution hose by
pushing in on
either indented
side of connector.
Solution hose
will pop out of
connector.
Remove pill-shaped float
from stack and sponge filter
from under top lid and rinse
all under running tap water.
Remove float assembly
from top lid by turning
counterclockwise to unlock
and pulling straight down.
1 2
3
Open top cover. Remove
separator and rinse under
running tap water.
5
6
Remove pleated filter from
inside of tank and rinse
both filter and tank clean
under running tap water.
Insert proper separator back into
top lid and place on tank. Place
tank back onto body and close
top cover. Reconnect hose and
solution hose.
11
QUICK EMPTY (Follow steps 1-6)
FINAL EMPTY (Follow steps 1-11)