10
global.BISSELL.com
After-Cleaning Care
(continued)
Cleaning the Removable Nozzle
Cleaning the Ready Tools Dial
1.
Grab the sides of the top of
the nozzle and pull forward.
2.
Rinse nozzle under running
water.
3.
When finished, replace
nozzle by slightly raising front
of machine to line up slots
on each side of the base with
hooks the nozzle. Push forward
to click nozzle into place.
1.
Remove the front nozzle.
2.
Use a Phillips-head
screwdriver to remove the
screws that hold the assembly
in place. Set them aside.
3.
Remove assembly.
4.
Hold assembly under
running water. Make sure water
flows through and around the
dial. Turn the dial about 10
times each way to clear debris.
5.
Replace assembly and
screw.
6.
Replace the front nozzle.
If Ready Tools Dial is hard to turn, the diverter assembly that holds it may need to be cleaned.
WARNING
To reduce the risk of electric shock, push power pedal OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting checks.
