5
www.BISSELL.com
Assembly
1
Place the upper handle
onto the base and push
it down. Then attach
the handle with the 2
screws taped to the
handle in a plastic bag.
The only tool you will need to assemble your vacuum is a
Phillips-head screwdriver.
Insert the lower cord
wrap and turn it to the
right to lock in place.
2
3
4
5
Insert the hose end into the
back of the vacuum and twist
right to lock in place.
NOTE:
The PowerFoot will not suction properly unless the hose is firmly attached.
Wrap hose up and around
the hose wrap on the
handle. Slide end of hose
into vacuum base.
TurboBrush®
Tool
Dusting
Brush
Extension Wand
(Crevice Tool
stores inside)
Now, put your accessory tools on the vacuum
and you’re ready to go!
