Bissell BGU500T, Руководство пользователя

Страница: 5 / 6

Grooves
Latch in
lock position
Tabs
Push the new belt onto the brush
roll pulley. Take the belt through the
floor brush section towards the
motor shaft. Push the brush roll into
the grooves at the sides and then
push the belt onto the motor shaft.
Re-attach the belt cover and replace
the bottom plate by aligning it with
the groove at the front end of the
nozzle head and fastening the latch.
Cleaning the suction hose:
If suction is reduced it may be
caused by a blockage in the suction
tube.
To remove a blockage, unplug the
vacuum cleaner and return to the
upright position. Pull out the
suction tube from the connection to
the vacuum cleaner by the suction
ring, being sure to hold the handle
with one hand to stabilise the
vacuum cleaner.
Remove the blockage carefully,
ensuring you do not damage the
suction hose. Once removed, insert
the suction hose back into the pipe
and turn on the vacuum cleaner to
check the blockage has cleared.
PACKAGING
• Dispose of packaging at your local
recycling centre.
• Dispose of paper and carton separately
from plastic bags at your local
recycling centre.
• Dispose of item at the end of its
lifespan at your local authorised
household waste recycling centre.
On/Off switch
Crevice
tool
Suction
ring
Upper hose
hook
Pedal
Lower hose
hook