Bissell BGU500T, Руководство пользователя

Страница: 4 / 6

Insert the new bag into the bag
stand, ensuring the grooves are
correctly aligned with the back of
the bag and re-fit the bag stand
onto the bracket. Replace the front
cover, ensuring the latch is secure.
Replacing/cleaning the filter:
Unplug the vacuum cleaner before
changing the filter. Remove the air
inlet filter to allow access to the
HEPA filter and its stand. Remove
the filter and stand. Wash the filter
in clean water and allow to dry fully
before re-fitting. If the filter remains
dirty after washing, it will need to
be replaced. Re-fit the HEPA filter,
stand and air inlet filter before
vacuuming.
Replacing the belt:
Unplug the vacuum cleaner before
changing the belt. Before replacing
the belt, set to the hard floor
setting. Remove the bottom plate
and belt cover.
Remove the belt and brush roll:
Ease the belt off the motor shaft
and then lift the brush roll out of
the side grooves.
Inlet
air filter
Inlet air filter
HEPA filter
HEPA filter
HEPA filter stand
Belt cover
removed
Belt
removed
Brush roll removed
Bottom
plate
removed
Bag stand
Locking tab
Hole
Grooves
New bag
Back of bag
Belt
Belt
guide
Motor
shaft