How To Use This Guide
This User’s Guide has been designed to help you
get the most satisfaction from your BISSELL PowerForce
Turbo Bagless. You’ll find assembly and operating
instructions, safety precautions, as well as maintenance
and troubleshooting instructions. Please read this Guide
thoroughly before assembling your vacuum cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they fit. Following
this User’s Guide will greatly enhance your ability
to get the most performance from your BISSELL
PowerForce Turbo Bagless for many years.
The only tool you’ll need to assemble your vacuum
cleaner is a screwdriver.
Locate the vacuum Handle and remove the screw
packet taped to the base of the Handle.
Stand the vacuum upright and place the Handle on the
top of the vacuum body as shown.
Insert the screws provided from the screw packet into
the existing holes on each side. Tighten securely with
a screwdriver.
Attach the Twist ‘n Snap
™
Hose by lining up the tabs on
the base with the corresponding notches on the back of
the vacuum as shown.
Turn the Twist ‘n Snap Hose to the right to lock the hose
into place.
Grasping the Quick Reach Handle, slide the end of the
Hose Wand onto the Hose Wand Base. Snap the Hose
into the Hose Clip.
NOTE: The Powerfoot will not operate
effectively unless the Hose Wand is
firmly attached.
Slide the Extension Wand and the Crevice Tool together
into the storage clip on the side of the vacuum.
Snap the Combination Tool into the storage clip on the back of
the vacuum.
The TurboBrush
®
Bracket slides onto the front of the Handle.
Attach the Bracket by aligning the pegs with the holes on the
Handle as shown and pulling down until it is locked into place.
1.
Attach Handle To Vacuum
5
How To Put It Together
2.
3.
Attach Vacuum Hose and Tools
1.
2.
WARNING:
Plastic film can be
dangerous. To avoid
danger of suffocation,
keep away from
babies and children.
3.
4.
5.
6.
ug203-2829_6596_1105.indd 5
ug203-2829_6596_1105.indd 5
1/11/06 4:03:35 PM
1/11/06 4:03:35 PM
