Bissell 2908N, Руководство пользователя

Страница: 7 / 8

7
BISSELL.eu
2 1
3 4
Replacing the Battery
DO NOT REMOVE THE PLASTIC SHRINK
SLEEVE FROM THE BATTERY PACK.
Install the
new battery
into battery
compartment.
Use a
Phillips-head
screwdriver
to replace
the battery
cover and two
screws.
A Phillips-head screwdriver is
required for this task.
Turn the
Power Switch
OFF (0). Use
a Phillips-head
screwdriver
to remove the
two screws
and battery
cover.
Remove the old battery from battery
compartment. Note the tape location
that covers over the connectors.
Remove the tape by unwrapping, then
separate the connectors.
Connect the new battery. Wrap
the tape to the original location to
completely cover the connectors and
terminals.
After repeated use, debris can accumulate on the
sensors of the robot and the robot’s performance
could be affected.
To ensure the best efficiency, the sensors should
be cleaned off periodically by brushing any debris
from them.
Before cleaning the sensors, ensure the Power
Switch on the robot is in the OFF (0) position.
Cleaning the Sensors
WARNING
To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.