www.BISSELL.com
5
Step 1: Install the Battery
Assembly
Step 2: Install the Side Brushes
WARNING
Do not plug in your robot vacuum until you are familiar with all instructions
and operating procedures.
DO NOT REMOVE THE PLASTIC SHRINK SLEEVE FROM THE BATTERY PACK.
Before installing the
battery, check that the
Power Switch is OFF.
Press down on battery
cover and slide forward to
insert the battery.
1
To install the side
brushes, push the
brush into the
holder. You may
hear a “click” that
indicates that the
brush is in place.
Getting Started
There are 4 steps to set up your robot:
Step 1:
Install the Battery
Step 2:
Install the Side Brushes
Step 3:
Turn ON the Power Switch on the side of the robot
Step 4:
Charge your SmartClean® Connected
Install the battery in the
compartment ensuring
that the +/- terminal of
the battery match the +/-
indicators in the battery
compartment.
Replace the Battery
Cover.
2
3
