www.BISSELL.com
12
After repeated use, dirt and dust can
accumulate on the Sensors of the robot and
the working efficiency can be reduced.
To ensure the best efficiency, the Sensors
should be cleaned off periodically by brushing
any dirt or debris from them.
Before cleaning the Sensors, ensure the robot
is not attached to the Charging Cable or Dock
and the Power Switch is in the OFF position.
Cleaning the Sensors
Cleaning the Side Brushes
The Side Brushes can be rinsed and if
they become crooked, you can soak
them in hot water to make them return to
the original shape. Replace the brushes
after they have completely dried.
Turn OFF the Power Switch, and make sure
the unit is unplugged. Place bottom of the
cleaner upward on a flat surface. Hold the
Brush bristle and pull upward to remove
the Brush.
1
2
NOTE:
After being used for a period of time, the Brushes need to be cleaned to work
more effectively.
