12
Take a posture so that the position
of the housing of the left shoulder
becomes the most top of a float
(vertical posture), and then
push the “OUT” button at hand,
air will be exhausted from the
housing.
BASIC USAGE
Exhaust Air of a B.C.
□Exhaust air by “OUT” button.
□Exhaust air by “ORAL” button.
□Exhaust by exhaust knob.
Supply Air to a B.C.
When you push “IN” button, air is supplied to a B.C.
□Supply air by “IN” button. (Underwater and surface)
□Supply air by “ORAL” button. (Surface only)
In the state of keeping enough buoyancy by a fin kick, hold a
mouth piece of an inflator in your mouth firmly, push oral
button only while blowing a breath, and supply air into a float
【
Note
】
●Exhaust by the “OUT” button
is performed only when an low
pressure hose of B. C. is set up
correctly and tank valve is
opened.
Take a posture so that the position
of the housing of the left shoulder
becomes the most top of a float
(vertical posture), and then push
the “ORAL” button while facing a
inflator toward surface, air will be
exhausted from a mouth piece
portion of inflator.
Take a posture so that the position of the relief
valve of the right shoulder becomes the most
top of a float (vertical posture), and then pull the
exhaust knob, air will be exhausted from the
relief valve of the right shoulder.
Housing.
Relief valve.
【
Note
】
●If you continue to supply air to a B. C. which is already full
of air, in order to prevent the burst of float, it has structure
which releases air from a relief valve.
Warning
●Do not perform air supply by pushing “ORAL” button
underwater. You drink water by mistake, and it may cause
an accident resulting in injury or death.
●Air supply by the “IN” button of an inflator is performed
only when air is in a tank. Air is not supplied when there is
not enough air.
Warning
●When an inflator is not set up correctly such as, B. C. hose
is not installed correctly, tank valve is closed, air
pressure in a tank is not enough, exhaust by the “OUT”
button cannot be performed.
■In the case of a shoulder relief valve.
Take a posture so that the position of
the relief valve of the right waist
becomes the most top of a float (When
head first etc.), and then pull the
exhaust knob, air will be exhausted from
the relief valve of the right waist.
■In the case of an under relief valve.
Wear Weight
(JX3010Q only)
HOW TO USE A WEIGHT POCKET
Warning
●Please do not use the weight release buckle other than
emergency. Otherwise it may cause an accident resulting
in injury or death.
●When you wear weight, please check that the weight
release buckle is set correctly. When the buckle setting is
imperfect, it may cause injury by dropping weight.
Press the center of a buckle with your fingers strongly to
release the buckle, pull out an inner pocket.
1
Open a flap of the
inner pocket, and put
in a weight.
2
Put the inner pocket in the
weight pocket, fasten the
buckle by pushing male
side into female side until it
sounds “click”.
3
Remove Weight
(JX3010Q only)
Press the center of a buckle with your fingers strongly to
release the buckle, pull out an inner pocket.
1
O p e n a f l a p o f t h e
i n n e r p o c k e t , a n d
remove a weight.
2
Put the inner pocket in the weight pocket, fasten the
buckle by pushing male side into female side until it
sounds “click”.
3
When Securing of Buoyancy is Immediately
Required.
(JX3010Q only)
Warning
●Please do not perform the quick release by the following
methods other than emergency. The weight that dropped
hit another diver, and it may cause an accident resulting
in injury or death.
●Please also teach a buddy the method of the weight
release. Otherwise when an accident happens the buddy
may not be able to rescue you.
Press the center of a buckle with your fingers strongly to release the buckle.
1
When the opening of a
w e i g h t p o c k e t f a c e s
downward (the direction of
the sea bottom), weight
falls.
When the weight does
not fall automatically,
please pull the handle of
the inner pocket, and take
it out.
2
【
Note
】
●Please wear the weight of 2 kg or less in one side. A
pocket may be damaged.