10
How to Use Shoulder
Waist Buckles
□Release a buckle
When you press the center of a buckle with
your fingers strongly as shown in a figure, the
buckle will be released.
□Lengthen a belt
Lift a buckle to the front, as shown in a
figure, and lengthen a belt.
■Accurate wearing state
□Fasten a buckle
When you insert male side of a buckle into the
female side as shown in a figure, it will fit in with
a sound of “click”
□Shorten a belt
Ｄ
Just pulling down a D-ring, you can shorten a
belt length. When you wear a B. C., pull down
the D-rings at both sides simultaneously, and fit
to your body.
D-ring.
PUT ON
・
TAKE OFF
Please learn how to use various buckles before actually wear
the B.C.
(How to Use Shoulder
・
Waist Buckles)
Warning
●Please do not release various buckles of shoulder
・
waist
underwater. It may cause an accident resulting in injury
or death.
BASIC OPERATION OF AIR SUPPLY
EXHAUST & ACTUATION CHECK(Continued)
Warning
●Do not use this product if it is not functioning normally.
●If you find any abnormality by the following check, please
stop use and consult with your original dealer or
authorized distributor of our company.
Exhaust Operation of Relief Valve &
Actuation Check
□Actuation check
【
Note
】
○In order to prevent the burst of a float when putting air
too much in it, the role of a relief valve is to exhaust air
automatically when the pressure inside float exceeds a
fixed level.
○Please refer to Page 12 for underwater exhaust operation.
□Visual check
Check whether the string of each shoulder and under
exhaust knob is not being broken.
Push the “IN” button and inflate a float.
1
■Exhaust operation by shoulder relief valve. “Quick Deflation”
When you pull an exhaust knob
downward, a valve on a shoulder
will be opened only while it is
pulled, and the air in a float will be
released through the relief valve on
the right shoulder.
Put air in a float about 80% and
check whether air is exhausted only
while you pull the exhaust knob.
■Exhaust actuation at the time of over pressure
Also, continue to push the “IN” button and confirm that
air is automatically exhausted from a relief valve.
2
Caution
●In the case of the exhaust by a relief valve, if exhaust
knob is pulled too strong, it will become a cause of
breakage. The power which can open a valve is enough.
Please check the proper level of power before use.
■Exhaust operation by under relief valve. “Quick Deflation”
When you pull an exhaust knob downward, a valve on a
waist will be opened only while it is pulled, and the air in a
float will be released through the relief valve on the right
waist.
Put air in a float about 80% and check whether air is
exhausted only while you pull the exhaust knob.