Bism Neleus JX3010 Скачать руководство пользователя страница 1

JX3010(NELEUS)
B.C

OPERATING 

MANUAL

Introduction

Thank you for purchase of our product.
This operating manual is the guidebook to provide instructions 
on how to use your buoyancy compensator (B.C.), NELEUS, 
for recreational diving.
We believe this manual is useful in mastering technology of a 
B.C. for people who have learned the right usage of a B.C.and 
obtained a C-card through proper training at a diving 
instruction organization as well as people who use it at C-card 
training. Please carefully read and digest the contents of this 
manual before use. We also suggest that you take this manual 
with you to refer to before diving.
Keep this manual in a safe place. If you lose it, contact your 
original dealer or authorized distributor of our company. A 
replacement manual will be reissued later.
The main contents consist of assembly of B.C., setting to a 
tank, the check before use, usage, care after use, storage, and 
a periodic inspection.
B.C. NELEUS is diving gear to use in combination with a 
regulator for recreational diving. Therefore, the knowledge of 
the right handling of regulator is also necessary. Please use 
the operating manual of the regulator which you use as well as 
this manual of NELEUS.
In addition, depending on the model of regulator, it is 
considered not being suitable for the use by the combination 
with this product. We recommend you use by the combination 
with the regulator made by Bism.
We are constantly researching and improving our B.C., and so 
the product you purchased may differ in certain details from the 
one described in this manual. If you have any queries 
regarding your B.C. or the information contained in this 
manual, please feel free to contact our company at the address 
below.

Bism CORPORATION

5F, 3-6-18, Higashinihonbashi, Chuo-ku, Tokyo 103-0004 Japan
Phone: +81-3-5640-8126 Fax: +81-3-5640-8131
E-mail: [email protected]

 

URL: http://www.bism.co.jp

Introduction

・・・・・・・・・・・・・・・・・・・・1

Important Information

・・・・・・・・・・・・・・・・2

Special Features & Specifications

・・・・・・・・・・2

Name of parts 

・・・・・・・・・・・・・・・・・

 

・・・3

Precautions

・・・・・・・・・・・・・・・・・・・・・5

Assembly

・・・・・・・・・・・・・・・・・・・・・・6

Before Setting to a Tank

・・・・・・・・・・・・・・・6

Setting to a Tank

・・・・・・・・・・・・・・・・・・8

Installation of B. C. Hose

・・・・・・・・・・・・・・8

Basic Operation of Air Supply

Exhaust & Actuation Check

・9

Put on

Take off

・・・・・・・・・・・・・・・・・・10

Basic Usage

・・・・・・・・・・・・・・・・・・・・・12

How to Use a Weight Pocket

・・・・・・・・・・・・・・12

2 Way Inflator

・・・・・・・・・・・・・・・・・・・13

Adjustment of F.T.A. (Front Tightening Adjuster)

・・・13

Remove a B. C. from a Tank

・・・・・・・・・・・・・・14

Wash & dry

・・・・・・・・・・・・・・・・・・・・・14

Storage, Periodic Inspection & Service after the Sales

・15

Troubleshooting

・・・・・・・・・・・・・・・・・・・16

 CONTENTS

Danger

 

Danger indicate a great risk of death or serious 

injury from improper use.

Warning

 

Warning indicate a risk of death or serious injury 

from improper use..

Caution

 

 

Caution indicate a risk of minor injury or damage to 

property from improper use.

Note

Useful Information to know.

Key to Symbols Used in this Manual

1

Содержание Neleus JX3010





















Отзывы: