Bishamon SCL3000A, Руководство по эксплуатации

Страница: 15 / 28

･
Lift (Supporter) must be lowered fully before vehicle enters
･
Make sure to park the vehicle so that CG of the vehicle stay within the range
shown in Yellow Color Arrow on the side of the Supporter. If not, vehicle may fall
due to the vibration during lift operation and vehicle servicing.
Caution
Supporter
CG Label
･
Support vehicle on lifting points which are designated by vehicle manufacturer.
DO NOT lift up vehicle on other points, or vehicle could be deformed or fall down.
DO NOT lift up vehicle if lifting point of the vehicle is not clear.
Warning
･
DO NOT put any other supporter but genuine Side Sill Block between Supporter
and vehicle lifting point.
･
If try to lift up vehicle (load) by only one side Supporter at around 30mm height
from floor, lift may lower. Pay close attention so that hands and fingers etc.
should not be pinched in the gap between Base and Supporter.
･
The mud guard may hit the Supporter of the lift when vehicle entering if the
vehicle minimum height is low like sport car which please note. For those low
profile vehicle, use optional Sub Step Ramp.
Caution