Bishamon SCL3000A, Руководство по эксплуатации

Страница: 13 / 28

It is installed at each cylinder to prevent lift
of hydraulic hose etc.
However, be noted that there is no safety hook
below approx. 200mm height from floor.
It is installed at the piping closest to each
cylinder. It would shut off oil flow from
cylinder in case of sudden flow of oil from
cylinder due to breakage of hydraulic circuit
etc.
a. Lifting excessing rated lift capacity
b. Lift is reaching the top
c. Excessive high pressure in hydraulic line
It is installed inside Sub Plate.
It would sense the excessive electric current,
and shut off the electric circuit and protect
electric components such as motor etc.
It is installed at magnetic contactor.
It would prevent lift from break in case of below
from lowering in case of oil leaking and breakage
Lowering Stop
Device
Fuse Valve
Relief Valve
Thermal Relay