Bishamon BSC3200KU, Руководство по эксплуатации и обслуживанию

Страница: 15 / 23

ー 12 ー
Operation Instructions
9
〈 Process in Servicing Vehicle 〉
1. Vehicle Entry
2. Set Up Lifting Point
Cautions
・ When vehicle enters, Drive-on Plates must be fully lowered.
・ Locate vehicle so that CG of the vehicle and lift center would be in the same
spot. Then vehicle would be stable.
Caution
Support vehicles on lifting points which is designated by vehicle manufacturers
when lifting them up. Do not lift up vehecles on other points, or vehicles could be
deformed or broken.
DO NOT lift vehicle if you are in doubt on its CG position.
CG = Center of Gravity
Vehicle must be positioned evenly so that CG of the vehicle and lift center would be
in the same spot according to the vehicle models.
To locate CG of the vehicle, refer to the service manual of the vehicle or contact
vehicle manufacturer.
・ Put Side Sill Blocks between Drive-on Plates and lifting points of vehicle.
(Adjustable Drive-on Plate Type)
・ First, lift up Drive-on Plates until they compeletely come out from the ground.
Then slide the Plate and put Side Sill Block between Drive-on Plates and lifting
points of vehicle.
Vehicle
Entry
Set up
Lifting
Point
Lifting
Lowering
Vehicle
Exit