EN
4
3.
Whilst you are doing this, the status LED will first flash green 3 times,
then blue. When the status LED turns blue, you can remove the
screwdriver.
(The Birth Alarm Mobile Premium/Lite is now in
programming mode)
(see 7.1)
4.
The Birth Alarm Mobile Premium/Lite will now connect to the provider.
(if you have installed a new SIM card, the Birth Alarm Mobile
Premium/Lite may perform a number of one-time configurations. This
may take several minutes)
5.
When the Birth Alarm Mobile Premium/Lite has established a
connection to the provider, the status LED will flash 1x blue and 1x
green alternatingly.
6.
Now call the Birth Alarm Mobile Premium/Lite with your own
(preferably mobile) telephone. The number for the Birth Alarm Mobile
Premium/Lite is stated on the card or on the sticker from the prepaid
package that you purchased or which was supplied with the Birth Alarm
Mobile Premium/Lite.
(see 7.2.1)
(Note! Your mobile phone's caller
display feature must be switched on. This means that when you call
someone, that person must be able to view your mobile number on the
screen of their telephone. If necessary, consult the user manual for your
mobile telephone)
7.
The Birth Alarm Mobile Premium/Lite will receive your call and will
store your number in the memory.
8.
The Birth Alarm Mobile Premium/Lite will now call you back to confirm
the number. You do
not
need to answer!
9.
The Birth Alarm Mobile Premium/Lite is now programmed for use! After
a few seconds, the status LED will alternate between flashing 1x blue
and 2x green.
(You now have the option of programming a 2
nd
, 3
rd
, and
4
th
number using the same method. There are 2 alternative methods for
programming the internal SIM card. These are by SMS or direct
programming on another mobile telephone.)
10.
When you have finished programming the device, wait approximately 2
minutes until the Birth Alarm Mobile Premium/Lite automatically leaves
BW QUICKSTART.indd 4
15-02-2011 12:28:13