BIRO 55, Руководство по эксплуатации и обслуживанию

Страница: 18 / 32

Blade Tension Screw
INSTALLATION INSTRUCTIONS
Disconnect the machine from the main power supply.
Loosen tension on the saw blade and remove the upper wheel assembly.
Unbolt the (A) tensioning handle from the (B) blade tension screw.
At the bottom handle mount turn the (B) blade tension screw clockwise until it can be lifted out of the
(C) housing.
Apply a good food grade grease to the replacement (D) tension screw and install into the (C) housing
turning counterclockwise until it bottoms out.
Replace the (A) tensioning handle. Be sure the (E) spring and (F) plunger pin are still present in the
end of the (A) handle.
Replace the upper wheel assembly and the blade.
Tension the blade.
16
(A) 55173 Tension handle
(B) 55172 Blade tension screw
(C) 55171-1 Adjustment housing
(D) 55172K
Blade tension screw kit
(E) 14554 Compression spring
(F) 55178 Plunger pin
55184 O-ring, large
55313 Plastic washer
55314 O-ring, small
AN15S acorn nut, ¼-20
HHS048S Hex head screw ¼-20
´
1¼