BIRD SMK-3000 Series, Руководство пользователя

Страница: 19 / 44

Equipment Description
9
Settings Menu
The settings menu is used to select what information will appear on the 4421A’s display as well as configuration of
the LAN and Serial Ports. Figure 7 describes the options available via the setting menu.
Figure 7 Settings Menu
Item Title Description
1
Measurements
Check boxes used to select which measurements are displayed for the
attached sensor(s).
2
Match Format Radio buttons used to select the format for the match measurement.
3
Display Graph
When check box is selected, a graph is displayed on the screen with the
associated measurements.
4
Use Legacy RS232
When check box is selected, the 4421A will accept the RS-232 command
set used with legacy 4421 power meters. See Chapter 6, Legacy RS-
232 Commands on page 23 .
5
Use Command
Mode
Command mode emulates the command mode dip switch setting from
the legacy 4421 power meter’s RS-232 command set.
6
Settings Icon
When tapped, a menu is displayed for selecting the LAN or Serial
configuration menus.
• When LAN is tapped, the 4421A’s IP address configuration menu is
displayed. See "IP Address Settings Display" on page 11 .
• When Serial is tapped, the 4421A’s serial port settings dialog box is
displayed. See "Serial Port Setup" on page 12 .
7
About
Displays the unit’s Model Number, Serial Number, and Firmware ID.
Compliance and software licensing information may also be viewed from
the About menu.
) )RUZDUG
'LVSOD\*UDSK
96:5
5HÀHFWHG
8VH/HJDF\56
6HWWLQJV
$ERXW
8VH&RPPDQG0RGH
5HWXUQ/RVV
0DWFK
5HÀ&RHႇ
L