BIRD ACM500I M Series, Руководство по эксплуатации

Страница: 43 / 48

Maintenance
32
Troubleshooting
The Bird Antenna Monitor has no operator serviceable parts. Any required
service must be performed at an authorized service facility.
The table below contains troubleshooting information for problems which can
occur during normal operation. This manual cannot list all malfunctions that
may occur, or their corrective actions. If a problem is not listed or is not
corrected by the listed actions, notify a qualified service center.
Problem Possible Cause Correction
Operation/Test LED
does not illuminate
No DC power Check power source.
Defective LED
Return the unit to an authorized
service center.
Alarm LED does not
illuminate
Defective LED
Return the unit to an authorized
service center.
High VSWR
Dirty connectors Clean connectors.
Defective connectors
Return the unit to an authorized
service center.
Shorted or open
transmission line
Have the line serviced.
Customer Service
Any maintenance or service procedure beyond the scope of those in this
chapter should be referred to a qualified service center.
If the unit needs to be returned for any reason, request an Return Material
Authorization (RMA) through the Bird Technologies website. All instruments
returned must be shipped prepaid and to the attention of the RMA number.
Bird Service Center
30303 Aurora Road
Cleveland (Solon), Ohio 44139-2794
Fax: (440) 248-5426
E-mail:
bsc@birdrf.com
For the location of the Sales Office nearest you, visit our Web site at:
http://www.birdrf.com