Displaying / Trouble shooting
4
Event / display
Reason
Solution
Memorise on transmitter:
Signal sounds for 10 seconds
Transmitter memory full.
The maximum number of
7 transmitters per output
has been exceeded
Delete memory
Memorise on transmitter:
No signal after transmitter
key press
No radio connection.
Frequencies of transmitter
and receiver must match
Set DIP switch correctly:
Frequency 1 (869.85 MHz)
or
Frequency 2 (868.95 MHz)
(Factory setting)
In operation:
Malfunctions (e.g. close
to a construction crane)
Highly disrupted radio
connection
Switch on automatic
frequency adaptation
On every actuation:
Signal sounds 2-4 times
Batteries soon depleted
Change batteries
Technical data
5
System
(RFGate 2.2.A)
Frequency bands
868.95 MHz & 869.85 Mhz
Range
25 m, under optimum conditions up to 75 m
Protection class (IEC 60529)
IP 55
Pollution degree
2
Ball pressure test (IEC 695-10-2)
PCB: 125°; housing: 75°
Software
Class A
Working temperature
-20°C to +55°C
Receiver
(RFGate 2.2.R.A)
Transmitter memory
7 + 7
Output
Relay, 24 V, 0,5 A; micro disconnection 1B
Supply voltage
12 / 24 VACDC
Power consumption
0.5 W @ 12 V, 1.2 W @ 24 V
Rated surge voltage (acc. to EN 60730-1)
300 V
Test signal input
12 / 24 VACDC
Dimensions
178 x 80 x 45 mm
Transmitter
(RFGate 2.1.S, RFGate 2.1.S.NC) (RFGate 2.1.S.F)
Supply voltage
3 VDC (2 x Lithium CR2032)
Power consumption
When transmitting: 17 mA
In sleep mode: 16 µA
Dimensions
190 x 51 x 36 mm
190 x 51 x 22 mm
Declaration of conformity
6
Bircher Reglomat AG, Wiesengasse 20, CH-8222 Beringen, Switzerland, www.bircher-reglomat.com
7
Contact data
Manufacturer:
Bircher Reglomat AG, Wiesengasse 20, CH-8222 Beringen,
Employee responsible for docu.:
Bircher Reglomat AG, Wiesengasse 20, CH-8222 Beringen
Product:
Switching device with radio transmission system,
Models:
RFGate 2.1, RFGate 2.2,
Serial numbers:
WWYY000000 - WWYY999999,
Notified Body:
Suva certificate
authority, division: technics, EU-ID-number 1246,
EC-type-examination certificates:
E 6945,
Following directives have been observed:
Machinery directive 2006/42/EG,
R&TTE Directive 1999/5/EG,
Following standards have been taken into account:
EN ISO 13849-1, EN 12978
,
Signee:
CTO, Dr. M. Loschonsky / COO, D. Nef, CH-8222 Beringen
