Birch DSP-850 Series, Руководство пользователя

Страница: 13 / 48

13
6. Software Status Setting Commands
When the system is POWER ON, it will read the DIP switch to set the
Command
Type
,
Baud Rate
,
Parity
,
Demo Mode
and
International Character
. User can re-set
the Software Status Setting Commands as following:
6.1. Baud Rate Setting Command
STX 05 B n ETX
/Change the baud rate setting/
ASCII Format STX 05 B n ETX
Dec. Format [02][05][66] n [03]
Hex. Format [02h][05h][42h] n [03h] 30h n 34h
≦ ≦
Description Change the display communication baud rate. The baud rate
setting can be selected from 4800 to 38400.
n Baud rate
30h 4800
31h 9600
32h 19200
33h 38400
6.2. Parity Check Setting Command
STX 05 P n ETX
/Change the Parity check setting/
ASCII Format STX 05 P n ETX
Dec. Format [02][05][80] n [03]
Hex. Format [02h][05h][50h] n [03h] n=30h, 31h
Description Change the display communication parity. Set 8 data bit and
the parity set for even or non-parity.
n Parity check
30h None-parity
31h Even-parity