© Biotage 2020
Quick Start Guide to TurboVap
®
II | Page 1
Evaporate
Settings
Evaporating
15:51 Wed 22 Jan 2020
Edit
Evaporate
7:35 min
Done
6:53 min
Done
4:01 min
Pause
Stop
End-Point + Time
Mode
Nozzle Setup
1.2
L/min
L/min
1.2
15 min
+Time
Status
Gas Flow
55
°
C
°
C
55
Bath Temp
45:55
Elapsed (min:sec)
1
2
6
9
3
4
5
8
7
For detailed instructions, see the TurboVap
®
User Manual.
Mode (1)
Display shows the current operation mode. Mode is controlled
by pressing the blue button. There are five evaporation modes
available on TurboVap II:
»
Manual:
Evaporate until the user presses the
Stop
button.
»
Time:
Evaporate for a set period of time.
»
End-Point:
Evaporate until the end-point sensors
detect a liquid level of 0.2 or 0.7 mL depending on the
glassware. Each sample tube is controlled individually.
»
End-Point + Time:
Evaporate for a set period of time after the
sensor detects a liquid level of 0.2 or 0.7 mL depending on
the glassware. Each sample tube is controlled individually.
»
Method:
There are several options. For more information,
see “Define Methods” in the TurboVap
®
User Manual.
Note that the two end-point detection modes are only enabled
when a TurboVap II end-point rack has been connected to the
system’s
AUX
port.
Time (2)
Display shows the set evaporation time (when in Time mode)
or the amount of time the evaporation will continue in a sample
tube after its liquid level passes below the sensor (when in
End-Point + Time mode). (Not shown in other modes.)
Gas Flow (3)
Display shows the current and set gas flow in L/min. Gas flow is
controlled by pressing the blue button.
Quick Start Guide to TurboVap
®
II
Bath Temperature (4)
Display shows the current and set water bath temperature in
°C or °F. Bath temperature is controlled by pressing the blue
button. Racks with end-point sensors can only be used at bath
temperatures up to 60 °C.
Nozzle Setup (5)
Display shows which nozzles are currently enabled. Nozzles
are selected ON or OFF by pressing the blue button. When in
End-Point or End-Point + Time mode, selection can only be done
when the system is not processing.
Status (6)
Display shows the remaining and/or elapsed time of the current
evaporation. When in End-Point or End-Point + Time mode,
individual tube status is shown; OFF, Idle, Evaporate, or Done.
When in End-Point + Time mode, remaining time is also shown.
Start/Pause (7)
Press to start or pause the evaporation in progress.
Stop (8)
Press to stop the evaporation in progress.
Settings (9)
Press to define system settings. Displays an alternative screen.
Evaporate
Settings
System Ready
16:48 Wed 22 Jan 2020
Manifold Setup
6 Positions
Sound Level
Medium
Sleep Mode
Edit
Temp Unit
°
C
Brightness
-
+
Change
Time & Date
16
48
:
2020
Jan
22
Bath Light
OFF
ON
More »
Lid Sleep
OFF
ON
Cont End-Point
OFF
ON
10
11
14
15
18
12
13
19
17
16
Sound Level (10)
Display shows the current sound level. Sound level is controlled
by pressing the blue button. The sound level can be set to Low,
Medium, High, or OFF.