Biotage ELSD-1080 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 59

background image

Biotage ELSD-1080

Safety Practices and Hazards

Your Biotage ELSD-1080 detector and accessories have been
carefully designed so that when used properly you have an

accurate, fast, flexible and safe analytical system.
Information about safety practices appears throughout the

documentation provided with your detector and accessories.
Before using the detector or accessories, you must thoroughly

read these safety practices.
Observe all relevant safety practices at all times.
This detector is designed for chromatographic analysis of
appropriately prepared samples. It must be operated using
appropriate gases and/or solvents and within specified

maximum ranges for pressure, flows, and temperatures as
described in this manual. If the equipment is used in a manner

not specified by the manufacturer, the protection provided by
the equipment may be impaired. Biotage assumes no liability

for the customer’s failure to comply with these requirements.
It is the responsibility of the customer to inform Biotage 1-Point

Support Representatives if the detector has been used for the
analysis of hazardous biological, radioactive, or toxic samples,
prior to any detector service being performed or when a

detector is being returned to the service center for repair.

General

Operation of the Biotage ELSD-1080 detector involves the use
of pressurized liquid and hazardous materials including

corrosive fluids and flammable liquids. Careless, improper or
unskilled use of the detector can cause death or serious injury

to personnel, and/or severe damage to equipment and
property.
Biotage ELSD-1080 detectors incorporate a cover that is

designed to prevent inadvertent contact with any potential
hazards. If the detector is used in any manner not specified by

Biotage, this protection may be impaired. It is essential that no
cover is bypassed, damaged or removed.
The safety practices described below are provided to help the
user operate the detector safely. Read each safety topic

thoroughly before attempting to operate the detector and
ALWAYS operate the detector in accordance with these safety
practices.
Follow these safety practices to ensure safe equipment
operation.

•

Perform periodic leak checks on all supply lines and
pneumatic plumbing.

Publication date: July 2010

9

«
...
7
8
9
10
11
...
»

Содержание ELSD-1080




























































Отзывы:

Нет отзывов

Похожие инструкции для ELSD-1080

Бренд: Comelit Страницы: 77

Бренд: Keysight Technologies Страницы: 19

Бренд: Super Circuits Страницы: 25

Бренд: Digimerge Страницы: 2

Бренд: Dahua Technology Страницы: 15

Бренд: Uniden Страницы: 68

Бренд: Uniden Страницы: 16

Бренд: Vivotek Страницы: 12

Бренд: Avigilon Страницы: 31

Бренд: CALECTRO Страницы: 4

Бренд: Milesight Technology Страницы: 106

Бренд: Chacon Страницы: 48

Бренд: hager Страницы: 2

Бренд: Vitek Страницы: 16

Бренд: Abus Страницы: 99

Бренд: Idis Страницы: 43

PRO-9642a Pursuit Series

Бренд: Audiovox Страницы: 8

Бренд: Paradox Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды