“Service” Indicator (Yellow)
At the top-left corner is the “Service Indicator”, flashing in two modes to indicate the
service is required and the degree of urgency to the requirement:
“Warning” Indicator (Yellow)
At the top-right corner is the “Warning Indicator”, flashing to indicate an error and the unit
has stopped operating:
“Preparing” Indicator (Green)
The “Preparing Indicator” will light solid-on or flash to indicate three different status for
iEOG’s preparation conditions:
“Service Code” Screen
When service is due, together with flashing service indicator, this screen displays service
code to notify the required item(s) for replacement.
In addition, it will also display a number from 1 to 6 together with display of “Operational
Code” in “Operation Info” screen. As the “Operation Code” are divided and displayed in
groups of 6, here this number from 1 to 6 is displayed for identification of the group
numbers (Refer to Service Manual in addition).
LED Mode
Interpretation
Slow Flashing Yellow
[On 0.5S/Off 0.5S]
Servicing parts approaching the end of lifecycle (2%
remaining).
Quick Flashing Yellow
[On 0.1S/Off 0.2S]
Servicing parts reached the end of lifecycle.
LED Mode
Interpretation
Quick Flashing Yellow
[On 0.1S/Off 0.2S]
Error encountered and operation is stopped.
LED Mode
Interpretation
Solid ON Green
iEOG preparation in process (pure water refilling).
Slow Flashing Green
[On 0.5S/Off 0.5S]
iEOG re-start protection (30 min suspended).
Quick Flashing Green
[On 0.1S/Off 0.2S]
iEOG preparation failure (PS. plus flashing warning).
13
