Chapter2
BIOS Setup
2-17
2.5 Integrated Peripherals
Figure 5. Integrated Peripherals
CMOS Setup Utility-Copyright (C ) 1984-2000 Award Software
Integrated Peripherals
►
OnChip IDE Control
Press Enter
Item Help
►
Muti-Media setting
Press Enter
Init Display First
PCI Slot
Menu Level
►
Onboard FDD Controller
Enabled
Onboard Serial Port 1
Auto
Onboard IR Port
Disabled
UART 2 Mode
HPSIR
X IR Function Duplex
Half
X TX,RX inverting enable
No,Yes
Onboard Parallel Port
378 / IRQ7
Onboard Parallel Mode
Normal
X ECP Mode Use DMA
3
X Parallel Port EPP Type
EPP1.9
: Move Enter :Select +/-/PU/PD :Value F10 :Save ESC :Exit F1 :General Help
F5 :Previous Values F6 :Fail-Safe Defaults F7 : Optimized Defaults
OnChip IDE Control
The chipset contains a PCI IDE interface with support for two IDE channels.
Select “Enabled” to activate the first and/or second IDE interface. Select
“Disabled” to deactivate an interface, if you install a primary and/or secondary
add-in IDE interface. If you highlight the literal “Press Enter” next to the “Onchip
IDE Control” label and then press the enter key, it will take you a submenu with
the following options:
OnChip IDE Channel 0
The chipset contains a PCI IDE interface with support for two IDE
channels. Select Enabled to activate the primary IDE interface. Select
Disabled to deactivate this interface.
The Choices: Enabled
(default), Disabled.