Chapter2
BIOS Setup
2-14
PCI Dynamic Bursting
When Enabled, every write transaction goes to the write buffer.
Burstable transactions the burst on the PCI bus and nonburstable
transactions don't.
The Choices: Enabled
(default), Disabled.
PCI Master 0 Ws Write
When Enabled, writes to the PCI bus are executed with zero-wait
states.
The Choices: Enabled
(default)
,
Disabled.
PCI Delay Transaction
The chipset has an embedded 32-bit posted write buffer to support
delay transactions cycles. Select Enabled to support compliance with
PCI specification.
The Choices:
Enabled,
Disabled
(default).
PCI #2 Access #1 Retry
When enabled, PCI
＃
2 will be disconnected if max retries are
attempted without success (default).
When disabled, PCI
＃
2 will not be disconnected until access finishes.
The Choices:
Enabled
(default), Disabled.
AGP device control
If you highlight the literal “Press Enter” next to the “AGP device control” label
and then press the enter key, it will take you a submenu with the following
options:
AGP Mode
This item allows you to select the AGP Mode.
The Choices:
1X, 2X,
4X
(Default).
AGP Aperture Size
Select the size of the Accelerated Graphics Port (AGP)
aperture.
The aperture is a portion of the PCI memory address range dedicated
for graphics memory address space. Host cycles that hit the aperture
range are forwarded to the AGP without any translation.
The Choices:
64M, 32M, 16M, 8M, 4M,
128M
(default).
