Chapter 2
BIOS Setup
2-27
IRQ-3
assigned to: PCI / ISA PnP
IRQ-4
assigned to: PCI / ISA PnP
IRQ-5
assigned to: PCI / ISA PnP
IRQ-7
assigned to: PCI / ISA PnP
IRQ-9
assigned to: PCI / ISA PnP
IRQ-10
assigned to: PCI / ISA PnP
IRQ-11
assigned to: PCI / ISA PnP
IRQ-12
assigned to: PCI / ISA PnP
IRQ-14
assigned to: PCI / ISA PnP
IRQ-15
assigned to: PCI / ISA PnP
The above settings will be shown on the screen only if “Manual” is chosen for the
resources controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus and
provides non-PnP ISA add-on cards. PCI / ISA PnP signifies that a resource is
assigned to the PCI Bus or provides for ISA PnP add-on cards and peripherals.
The Choices: Disabled
(default), Enabled.
Resources Controlled By
By Choosing “
Auto(ESCD)
” (default), the system BIOS will detect the system
resources and automatically assign the relative IRQ and DMA channel for each
peripheral.By Choosing “Manual”, the user will need to assign IRQ & DMA for
add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending on
the type of device using the interrupt. When you press the “Press Enter” tag, you
will be directed to a submenu that will allow you to configure the system
interrupts. This is only configurable when “Resources Controlled By” is set to
“Manual”.
