Chapter
3
RAID
Setting
Guide
3-4
3.2.3 Windows NT4.0
Install driver under Windows NT4.0
1. Click
Star
t-->
Setu
p-->
Control Pane
l, then double-click
SCSI
Adapter
icon.
2. In the follow-on window, select
Driver
item. then click
Add
button.
3. In the follow-on window, select
Have Disk..
..
4. Insert the floppy disk of driver, input the path of driver
A:\WinN
T,
then click
OK.
5. In the follow-on window, select
HPT370 UDMA/ATA100 RAID Con-troller
item, then click
OK.
6. Follow the system prompt to install the driver. When finished, re-start
the computer.
Install driver in the process of Windows NT4.0
installation
1. Press
F6
key when the system prompts
Setup is inspecting your
computer’s hardware configuration.
2. Press
F6
key, the installation will continue. Later, installation pro
gram will remind user to press
S
key to specify other devices. Please
press
S
key.
3. In the follow-on
Device Type
window, select
Other
item, then
press
Enter
to confirm.
4. The installation program will prompt users to insert the floppy disk
of driver. Please insert it and then press
Enter
to confirm.
5. In the follow-on window, select
HPT370 UDMA/ATA100 RAID Controller
,
then press
Enter
to confirm.
6. The follow-on interface will list the devices to be installed, in which
HPT370
UDMA/ATA100 RAID Controller
item should be included.( If users want
to install other devices, please operate at this time. If all devices have
been successfully installed, please go to next.)
7. Press
Enter
to continue the installation of Windows NT4.0.
