BioSmart DC Infrared Blanket
©2015 BioSmart® Technologies
- 9 -
Setting-up your Blanket
If your blanket is being purchased to place on the bed, it is recommended
that you place the control box (power supply) and the power cord under
the bead to avoid accidental tripping during the night. The power cord
is long enough to route it to the wall outlet that your bed headboard is
located against. The remote controls are placed on either night stand for
convenient operation. They will not interfere with each other regardless
of whether or not they are situated on the same night stand or on separate
night-stands. For single remotes, use whatever side of the bed is most
convenient for you. Some beds contain a head-board shelf that you can
place your remote control(s) on.
Place the infrared blanket on the bed, with the connector and its label
facing up at the foot of the bed. The size of the infrared blanket is designed
to make sure that the connector is hanging over the side of the bed to avoid
contact with the human body.
Some people prefer more blanket weight for comfort and this can be
accomplished by adding an additional blanket or duvet on top of your
infrared blanket and then reducing the comfort setting on the infrared
blanket to match the thermal properties of the infrared blanked plus the
additional covers. The blanket will monitor the total temperature and
adjust to maintain your comfort setting by taking into consideration the
additional insulation you have placed over the top of the blanket.
