October
15
2009
–
Installation
Guide
Draft
–
Edit
Purposes
Only
Page
54
Installation Guide – October 2009 – Edit Purposes Only
2009
9
WPA2 Personal.
NOTICE
L-1 Identity Solutions does not recommend using the "No
encryption" mode.
Enter the Admin menu on the device by pressing the Left arrow and Enter keys
simultaneously.
Key in the Admin password (default is "0000") and press OK.
Select the Communications icon and press OK
Select "Network Interface" and press OK.
Select "WLAN" Configuration and press OK.
Select Managed/Adhoc mode from WLAN Network type.
Select the intended wireless networks.
Enable WLAN mode from WLAN parameters.
Choose Encryption mode and encryption .
Enter the key.
Select "DHCP" or "Static" and press OK. If you selected "DHCP", the device reboots.
Afterwards, it will have a dynamic IP address. If you selected "Static IP", specify an
IP, a Net Mask, a Gateway, and then press OK.
SecureAdmin can scan for and auto-detect wireless devices. If you want to use
SecureAdmin to scan for wireless devices, ensure that the "multicasting" option is
enabled in your router.
NOTICE
The maximum recommended distance from an access point is 25
feet.
4.1.7 SINGLE-DOOR CONTROLLER INSTALLATION
The V-Station 4G and V-Flex 4G devices incorporate an internal relay that enables
them to operate a deadbolt/door strike directly.
