background image

Never place the monitor in a disinfecting or sterilizing machine!

13. Maintenance

Verification of the pressure measurement accuracy is recommended biannually.
All the devices are covered by a two-year warranty

 under general warranty conditions of BIOS Medical, 

see relevant topic. This warranty does not cover any malfunction or defects arising from improper use, the use 

of inadequate accessories, accident, theft, or use of the device outside operating environmental specifications or 

intended measurement range. Removing the closing label from the back side of the device voids this warranty.

There are no user serviceable parts inside the recorder;

 they contain high complexity electronic and fine 

mechanical components. If you have any problems, please call the BIOS Blood Pressure Hotline . All consequences of 

improper servicing are the sole responsibility of the user. Contact BIOS Medical for more information.

14. Disposal

Each Ambulatory Blood Pressure Monitor includes an internal NiCd coin cell which falls under the category of 

hazardous waste and should be disposed with proper care. The other parts of the device should be handled as normal 

electronic waste at roll-out. Used batteries may also fall under the category of hazardous waste and should be 

disposed with proper care.

15. Indication & Contraindications

Indications

-  Suspected white-coat hypertension

-  Suspected nocturnal hypertension

-  To establish dipper status

-  Resistant hypertension

-  Elderly patient

-  As a guide to antihypertensive drug treatment

-  Type 1 diabetes

-  Hypertension of pregnancy, including pre-eclamptic patients

-  Evaluation of hypotension

-  Autonomic failure

Contraindications

-  Non-cooperative patients, unconscious or otherwise incapable patients

-  Patients requiring urgency/emergency cardiac care

-  Patients with coagulation disturbances

-  Patients with serious mobility or other impairments without supervision

-  Children without supervision, or children younger than 8 years

-  Though the blood pressure measurement algorithm used in the monitors has been found to function properly on 

patients with atrial fibrillation or other common arrhythmias, the oscillometric blood pressure measurement method 

is generally recommended for use only with special caution in patients with arrhythmias, Parkinson’s disease or 

other diseases involving tremors.

16. Accessories List

- Ambulatory blood pressure monitor

- USB optical with USB driver cable

Содержание ABP-01





















Отзывы: