Biorock ECOROCK-1500 Скачать руководство пользователя

Страница: 25 / 51

B. USER GUIDE > 1. SAFETY INSTRUCTIONS

PAGE

25 / 51

Installation and User guide – ECOROCK - Systems – 26-05-2016

Safety instructions

Related to the installation and operation of a BIOROCK® treatment plant



NOTE: Consult with certified professionals regarding all installation and maintenance work,
and for all operations undertaken on this sewage treatment plant. Your distributor and/or
your installer will advise you on how to set up a maintenance contract.



NOTE: Household wastewater contains human faeces (excrement). This means that
wastewater may contain very noxious pathogenic bacteria. Under certain conditions (for
instance stagnant wastewater, high temperatures etc.) these noxious pathogenic bacteria
may be present in large numbers. Therefore, always use plastic gloves and proper
disinfectants if you come into contact with wastewater or with parts which have been in
contact with wastewater. The term wastewater also includes the final effluent (the purified
wastewater from the BIOROCK® System).



NOTE: The effluent CANNOT be reused for any other purpose other than discharge into the
surface water or infiltration into the soil. The water may contain traces of bacteria, which
under certain circumstances (stagnant water, high temperature etc.) may grow in large
numbers and be potentially harmful to human health.



NOTE: The final effluent (the “clean” water from the System) is NOT drinkable.



NOTE: Always keep the lid closed and open it only for inspections and maintenance work.
Never leave the lids and inspection points unsupervised while open. Lids are for pedestrian
use only.



NOTE: Do not put your head directly into the septic tank or BIOROCK® through the manhole
even to "have a look" or in an effort to find the cause of a malfunction. Noxious gases may
accumulate in the system and may interfere with respiration and cause nausea, dizziness and
in very extreme cases loss of consciousness.



NOTE: Do not install, repair, change or check electrical components yourself; this can be
extremely dangerous due to the combination of electricity and water especially when using
230 Volt. Leave this task to a qualified electrician, who can install the system in accordance
with NEN 1010. When using 12 Volt electrical accessories, there is no danger of
electrocution, but contact a qualified electrician If in doubt.



NOTE: Never smoke near the work area while the operations described in this manual are
being carried out, and never enter the work area without having taken all the prior
precautions for ventilation and atmospheric testing as prescribed in the applicable local
regulatory provisions.



NOTE: Any risks during the installation are related to excavation or handling of material.

While installing the tanks, use a sling hung from the 4 corners of the upper part of the tank.
Make sure that no one is in the maneuvering area, and do not position yourself under the load.