BIONIME GM232C, Руководство пользователя

Страница: 29 / 46

2. If, after performing the required steps, the “ ” and flashing “ ” symbols appear on the screen, it means
the Rightest Test strip GM232C has been inserted incorrectly more than twice. Please, re-insert the unused test
strip again after reviewing the steps on how to insert a test strip correctly on p. 24 or call Customer Service for
support. This error message can also indicate that you may have used the wrong test strips. Please check the test
strip vial to ensure you are using the
Rightest
Test strips GM232C.
53 52
Error Messages and Troubleshooting
Error Messages and Troubleshooting
Temperature Error
1. In order to get accurate testing results, please test between 50-104 °F ( 10-40 °C).
2. When the temperature is below 43 °F (6 °C) or over 111 °F (44 °C), the meter will not function
and the " " symbol will blink.
3. If the
Rightest
Blood Glucose Meter and Test Strips are exposed to a substantial
change in temperature, please wait 45 minutes before measurement.
GM232C
Battery Error
1. The " " symbol blinks when the battery power is low. Please change the
battery as soon as possible. You can still test.
and " symbols blink when the battery is too low. Meter cannot
test. Please change the battery immediately.
2. The " " "
Strip Error
1. When the test strip is inserted incorrectly, the meter will beep 4 times while the “ ”
symbol flashes. Do not apply a sample on the test strip. Please re-insert the unused test
strip correctly (refer to “Handling the Rightest Blood Glucose Test Strip “ on Page
24 for more information).
GM232C
1a 1b 2
1
2
Sampling Error
Please do not apply the blood to the sample port of the test strip before the meter displays ” ”.
Discard the test strip If the meter shows “ “.