Electrocardiograph (Ver 1.0)
12
How to Set BCM-600
How to Set BCM-600
13
BCM-600
How to Set BCM-600
(3) Maintenance and Cleaning After Use
A. Keep the product cleans by cleaning it using a soft cloth at least once a month. Do not use
thinner, ethylene, oxidant or lacquer since these may damage the product.
B. Keep the accessories clean of dust or foreign materials. For cleaning, use a soft cloth and
clinical alcohol.
C. Do not soak the accessories in liquid or detergents. Keep the product and accessories out of
any liquid.
D. For the protection of the environment, please contact the agency you purchased the product
from when you wish to discard the BCM-600
E. Our product can be used semipermanently. Please contact our Customer Service dept. or any
distributor and then replace the parts , when wasting parts such as battery, LCD or LED and
so on have a problem .
(1) Precautions for Settings
Pay attention when setting BCM-600 for the following points
- Use BCM-600 under conditions of 10
℃∼
45
℃
of circumstantial temperature and 30
％∼
85
％
humidity.
- Check the connection status of the power cord.
- Do not connect multiple cords to the power supply.
- Place the main body on a flat area.
- If noise occurs, ground the equipment.
- Do not use any electric cords generating connecting noise.
- Take care since the product can be broken by mechanical shock.
- Get rid of dust or inflammable material near the product when setting it up.
(2) Checkpoints before Use
Check the following points before measuring the patient’s condition.
- Make sure there is no mechanical risk.
- Check the lead, power plug, and accessories connected on the outside.
Precautions Before Use
①
Do not use product near dynamo, X-ray equipment, broadcast equipment.
②
Do not twist the cable.
③
Attach each Lead properly.
④
Keep the patient motionless with comfortable position while measuring
