Bionet Oxy9Wave Vet, Руководство по эксплуатации

Страница: 28 / 48

Oxy9Wave Vet
Operation manual
Ver. 1.52 4.Operation 28
[ Setting the Pulse Beep Volume ]
③
1. Press the Pulse Beep setting button.
2. Each step is displayed on the upper part of the screen.
The Button is used to change the sound level, Five levels of volume are available.
NOTE : During measurement, the pulse beep sound (tone) is changed automatically according to
the value of SpO ₂ .
[Rotate Display]
④
1. Press the Rotate Display Button.
NOTE : The display rotates 90 degrees.
4-4-4. How to use the monitor
[ Setting the Patient Monitoring Mode ]
The user can configure the display settings.
1. Calendar 8. Pulse rate
2. Clock 9. SpO ₂ Max/Min ALARM limit
3. Pulse rate Volume icon 10. BPM Max/Min ALARM limit
4. Brightness icon 11. Level bar
5. Save data icon 12. SYSTEM Message
6. Battery icon 13. Signal Graph
7. %SpO ₂ 14. Silence icon